Matched shear beam cells
Capacity, mV/V, impedance and excitation reviewed together.
INDUSTRIAL WEIGHING / COMPLETE SYSTEMS
Single-ended & double-ended weighing sensors.
100 kg–100 t selection scope.
Specify the sensor, mounting hardware and signal chain together. For floor scales, process tanks and truck weighbridges.
START WITH THE LOAD PATH
Choose the architecture before comparing output, sealing or price.
SENSORS + MOUNTS + SIGNAL
100 kg–10 t / 250–20,000 lb
Four-corner floor scales, belt weighers and industrial hoppers
Select configuration100 kg–10 t / 250–20,000 lb
Wet-process platforms and stainless tank systems
Select configuration5–100 t / 10,000–200,000 lb
Truck weighbridges, heavy hoppers and silos
Select configuration5–100 t / 10,000–200,000 lb
Outdoor weighbridges and corrosive-process weighing
Select configurationApplication-specific; submit axle and payload loads
On-board vehicle weighing and lightweight platforms
Select configurationMatched to selected load cell and structural loads
Three-support tanks, four-support hoppers and batching vessels
Select configurationCORNER-MATCHED MULTI-CELL KITS
A 3-cell tank kit or 4-cell floor-scale kit can be quoted with sensitivity and output-resistance matching, suitable mounts and a trim summing box.
Specify the matching tolerance and calibration records in the RFQ. Final corner adjustment and system calibration still take place after installation.
Specify your system packCapacity, mV/V, impedance and excitation reviewed together.
Platform feet and tank restraints serve different load paths.
Select channel count, surge protection and controller interfaces.
REPLACEMENT PROCUREMENT
Send the full Zemic®, Anyload®, AmCells®, Celtron®, Rice Lake® or Flintec® model and capacity. Dimensions, threads, excitation, sensitivity and wiring must all agree.
Open the replacement checklistIt does not define universal mounting hole spacing or establish interchangeability. Legal-for-trade approval must cover the exact supplied model and application.
Mixing sensitivity or output resistance in a parallel system changes load sharing and calibration. Check the existing cells and indicator before ordering.
Read the mounting & installation guideBEFORE YOU SEND THE DRAWING
Yes. Select one replacement spare and provide the exact original model, capacity, mounting drawing and electrical data. Compatibility is confirmed against the selected SBL drawing before ordering.
No. Sensitivity and output-resistance matching can reduce adjustment differences, but the installed system still requires corner adjustment and calibration with suitable reference loads.
Do not assume so. Confirm diameter, pitch, engagement depth, fixing-hole pattern and loading height for the exact capacity. Metric and imperial products may use different envelopes.
Request the exact model-specific test and approval documents with your quotation. IP ratings, OIML and NTEP requirements are separate; none establishes universal mechanical interchangeability.
DIMENSIONS. LOAD PATH. SIGNAL.
Send capacity per cell, support count, thread standard and your existing drawing.